Talica TAC8
Pre_installed LRS Style Drag Cam: Smooth drag is very important and one that Shimano prides itself upon throughout the product line. Talica is no exception to the rule. However, being able to fish 3 to 4 line classes heavier than you would normally on a reel of its size makes Talica more fun to fish since you spend less time fighting your tackle and more time fighting the fish. Pre-installed with an L.R.S. (Long Range Special) style drag cam, which is designed to provide maximum drag output for heavy settings with heavy line, the Talica Single speeds are specifically designed for fishng heavy PowerPro Hollow-Ace with short Flurorocarbon topshots. The 8 & 10 sizes will fish 50 pound PowerPro Hollow-Ace with ease, while the 12 & 16 sizes can utilize up to 100 pound Hollow-Ace!
Special 20Lb Cam Included in the Box: Not to be forgotten are the light line anglers, who prefer to use monofilament to target species like Sailfish and White Marlin. Many times these anglers use "light" line such as 12-20# monofilament simply for the sport. However, many utilize these light lines to target a specific line class in a tournament or also for World Record attempts. The Talica single speeds also come with a second cam in box just for these anglers. This drag curve was designed using feedback during Torsa's initial field testing at the Master's Tournament in Cancun, Mexico. With input from Master's Tournament anglers Stewart Campbell, Tom Greene and Bill Buckland, we created the S.F.S 20 cam. Optimized for 20# test line, it features a low, gradual area from Warning to the Half position that begins at 1/4 pound of drag to allow the angler minimal tension on the line when the fish bites and to allow the angler to quickly back of on a running fish. The steep section from the 1/2 to the Full position allows the target Strike setting of 6-8 pounds while providing a Full setting of 10 pounds. This cam allows the angler to use these powerful little reels without worrying about the drag backing off at these relatively low drag settings due to boat vibration, or the reel going into to freespool too early on the lever's range as a result of a drag curve designed for heavier line classes. (These cams are included in the box of all Talica Single Speed models and available for purchase to use on any Talica 2-Speed Model. Please see your local Shimano Retailer for details)
A-RB: A-RB bearings are stainless steel ball bearings that have been through the A-RB treatment process which makes them at least 10 times more corrosion resistant than standard stainless steel ball bearings.
• A-RB (Anti-Rust Bearings) are made of Stainless Steel that has been through the A-RB process.
• At least 10 times more corrosion resistant than standard Stainless Steel ball bearings.
• Easy Maintenance-no shield design allows for easy flushing of debris and easy lubrication.
• Increased Bearing Speed-no shield design and lighter viscosity lubrication reduce friction and allow the bearing to spin faster and longer.
High Efficiency Gearing: HEG consists of not only the gears, but also the frame, setplate, and handle-side sideplate. First we increased the size of the drive gear and the pinion gear to offer increased leverage and power. By using a one-piece frame that incorporates the setplate and adding a one-piece stamped sideplate, we have eliminated flex in the drivetrain that causes normal gears to bind under pressure. By eliminating the flex and increasing the leverage, we are able to provide high-speed retrieves and deliver an incredible amount of torque, while maintaining the smooth, silent retrieve Shimano reels are famous for.
S A-RB Bearings: These bearings have been through the same process as our A-RB bearings, but feature shields on both sides of the bearings that reduce the possibility of salt or sand inhibiting the bearing's rotation.
Cold Forged Aluminum Spool: These spools provide increased strength and durability over diecast aluminum or graphite spools.
FEATURES:
• Compact, High Speed, Castable Lever Drag, with High Capacity
• E.I. Surface Treatment for extreme corrosion protection
• 2 year warranty with online registration
• Comes with L.R.S Drag Cam Pre-Installed
• 20# Monofilament Cam included in box
• One-Piece Cold Forged and Machined Aluminum Frame with E.I.
• Machined Aluminum Handle-Side Sideplate with E.I.
• Cold Forged Machined Aluminum Spool with E.I.
• Lightweight Spool with Greaseless Spool Support Bearings for excellent live-bait castability
• Topless Design
• Oversized Carbon Drag Washers for Ultra-High Drag Pressures
• Waterproof Drag (when engaged)
• Silent Anti-Reverse
• Ergonomic Power Handle
• Super Stopper with Assist Stopper
• Ratcheting Drag Lever
• Preset Knob with Click
• Clicker
• HEG (High Efficiency Gearing)
• S A-RB (Shielded A-RB Ball Bearings)
• A-RB Roller Bearing
• Aluminum Rod Clamp
• Approved for use in Saltwater
• Rated for use with Mono, Fluorocarbon and PowerPro lines
Pre_installed LRS Style Drag Cam: Smooth drag is very important and one that Shimano prides itself upon throughout the product line. Talica is no exception to the rule. However, being able to fish 3 to 4 line classes heavier than you would normally on a reel of its size makes Talica more fun to fish since you spend less time fighting your tackle and more time fighting the fish. Pre-installed with an L.R.S. (Long Range Special) style drag cam, which is designed to provide maximum drag output for heavy settings with heavy line, the Talica Single speeds are specifically designed for fishng heavy PowerPro Hollow-Ace with short Flurorocarbon topshots. The 8 & 10 sizes will fish 50 pound PowerPro Hollow-Ace with ease, while the 12 & 16 sizes can utilize up to 100 pound Hollow-Ace!
Special 20Lb Cam Included in the Box: Not to be forgotten are the light line anglers, who prefer to use monofilament to target species like Sailfish and White Marlin. Many times these anglers use "light" line such as 12-20# monofilament simply for the sport. However, many utilize these light lines to target a specific line class in a tournament or also for World Record attempts. The Talica single speeds also come with a second cam in box just for these anglers. This drag curve was designed using feedback during Torsa's initial field testing at the Master's Tournament in Cancun, Mexico. With input from Master's Tournament anglers Stewart Campbell, Tom Greene and Bill Buckland, we created the S.F.S 20 cam. Optimized for 20# test line, it features a low, gradual area from Warning to the Half position that begins at 1/4 pound of drag to allow the angler minimal tension on the line when the fish bites and to allow the angler to quickly back of on a running fish. The steep section from the 1/2 to the Full position allows the target Strike setting of 6-8 pounds while providing a Full setting of 10 pounds. This cam allows the angler to use these powerful little reels without worrying about the drag backing off at these relatively low drag settings due to boat vibration, or the reel going into to freespool too early on the lever's range as a result of a drag curve designed for heavier line classes. (These cams are included in the box of all Talica Single Speed models and available for purchase to use on any Talica 2-Speed Model. Please see your local Shimano Retailer for details)
A-RB: A-RB bearings are stainless steel ball bearings that have been through the A-RB treatment process which makes them at least 10 times more corrosion resistant than standard stainless steel ball bearings.
• A-RB (Anti-Rust Bearings) are made of Stainless Steel that has been through the A-RB process.
• At least 10 times more corrosion resistant than standard Stainless Steel ball bearings.
• Easy Maintenance-no shield design allows for easy flushing of debris and easy lubrication.
• Increased Bearing Speed-no shield design and lighter viscosity lubrication reduce friction and allow the bearing to spin faster and longer.
High Efficiency Gearing: HEG consists of not only the gears, but also the frame, setplate, and handle-side sideplate. First we increased the size of the drive gear and the pinion gear to offer increased leverage and power. By using a one-piece frame that incorporates the setplate and adding a one-piece stamped sideplate, we have eliminated flex in the drivetrain that causes normal gears to bind under pressure. By eliminating the flex and increasing the leverage, we are able to provide high-speed retrieves and deliver an incredible amount of torque, while maintaining the smooth, silent retrieve Shimano reels are famous for.
S A-RB Bearings: These bearings have been through the same process as our A-RB bearings, but feature shields on both sides of the bearings that reduce the possibility of salt or sand inhibiting the bearing's rotation.
Cold Forged Aluminum Spool: These spools provide increased strength and durability over diecast aluminum or graphite spools.
FEATURES:
• Compact, High Speed, Castable Lever Drag, with High Capacity
• E.I. Surface Treatment for extreme corrosion protection
• 2 year warranty with online registration
• Comes with L.R.S Drag Cam Pre-Installed
• 20# Monofilament Cam included in box
• One-Piece Cold Forged and Machined Aluminum Frame with E.I.
• Machined Aluminum Handle-Side Sideplate with E.I.
• Cold Forged Machined Aluminum Spool with E.I.
• Lightweight Spool with Greaseless Spool Support Bearings for excellent live-bait castability
• Topless Design
• Oversized Carbon Drag Washers for Ultra-High Drag Pressures
• Waterproof Drag (when engaged)
• Silent Anti-Reverse
• Ergonomic Power Handle
• Super Stopper with Assist Stopper
• Ratcheting Drag Lever
• Preset Knob with Click
• Clicker
• HEG (High Efficiency Gearing)
• S A-RB (Shielded A-RB Ball Bearings)
• A-RB Roller Bearing
• Aluminum Rod Clamp
• Approved for use in Saltwater
• Rated for use with Mono, Fluorocarbon and PowerPro lines
0 komentar:
Posting Komentar